• RC-100 Series FAQ

RC100X Electronic Switch *NEW*
The RC-100X is an expanded version of the RC-100. This compact electronic switch can be configured in either a Normally Open or Normally Closed position. Simply plug the switch into an open channel of your R/C receiver and control your applications. Typical applications are ignition kills, magneto shut off, lights, etc. The RC-100X consumes very low power, and has a high current carrying capacity (Capable of 5 amps at 30V!)

RC100X - Electronic Switch $29.95

• Download the RC-100 Datasheet
• RC-100 Series FAQ

RC100 Electronic Switch
The RC-100 is a normally open relay switch. Simply plug this switch into an open channel on your R/C receiver. It will then act as an electronic switch for many applications! Excellent for an engine kill on magneto engines. The RC-100 consumes very low power, and has a high current carrying capacity (Capable of 5 amps at 30V!) Read the white paper PDF on it here.

RC100 - Electronic Switch $24.95


• Download the RC-110 Datasheet
• RC-100 Series FAQ

RC110 Electronic Switch
Just like the RC100 Electronic Switch, simply plug this switch into an open channel on your R/C receiver. The RC110 is the bigger brother to the RC100, consumes very low power, and has a high current carrying capacity. Capable of 10 amps compared to the 5 amps of the RC100.

RC110 - Electronic Switch $34.95



• Download the RC-100FO Datasheet

• RC-100 Series FAQ

RC100FO Fiber Optic Electronic Switch
This electronic switch plugs into an auxiliary port of a receiver and allows the switching of a circuit up to 5A at 30 volts. It comes with 2 feet of fiberoptic cable, which allows for the sending unit and the receiving unit to be isolated for long cable runs, where potential rf interference could be picked up. The remote unit requires its own power and has two leads which are the switched lines. This item is a favorite among IMAC contestants.


RC100FO - Fiberoptic Electronic Switch $49.95